Select
the right nozzle size for broadcast applications or banding applications 
Broadcast
Application: 





Branding
Application: 





1. Select
nozzle type. (See Nozzle Selection Guide & chemical label) 
1. Select
nozzle type. (See Nozzle Selection Guide & chemical label) 

Example:
RF Drift Reduction Raindrop Flat Spray tip for broadcast application
of postemerge contact herbicide 


Example:
RE Even Flat Spray tip for banding application of preemerge
herbicide. 

























2. Select GPA
from chemical label 

2. Select
desired GPA
from chemical label 

Example:
20 GPA (broadcast rate) 


Example:
20 GPA (broadcast rate) 





















3. Determine
tractor/sprayer speed in MPH 

3. Determine
tractor/sprayer speed in MPH 


Example: 5
MPH 


Example: 5
MPH 























4. Determine
nozzle spacing in inches 

4. Determine
band width in inches 


Example: 20
inches 


Example: 10"
bands on 20" row spacing 





















5. Substitute
numbers into formula to determine gallons per minute. 

5. Substitute
numbers into formula to determine gallons per minute. 

Formula: 


Formula: 




























Example: 


Example: 




























6.
Refer to the capacity chart for the desired tip in the Nozzles &
Tips section. 

6.
Refer to the capacity chart for the desired tip in the Nozzles &
Tips section. 




Example:
Refer to the capacity chart for the RF tips. Look
at the column headed "capacity one nozzle (GPM)" and find .34
GPM at the pressure desired. 

Example:
Refer to the capacity chart for the RE tips. Look
at the column headed "capacity one nozzle (GPM)" and find .17
GPM at the pressure desired. 








The
RF 3, 4, or 5 would provide the correct flow at 50, 30, or 20 PSI
respectively. 

The
RE 802RE would be correct when used at 30 PSI and 5 mpg. 



