New Page 1

F FLOODING SPRAY NOZZLES

FOR BROADCAST SPRAYING
The Delavan 1/4" flood nozzle is a wide-angle flat spray nozzle offering uniform coverage at lower spraying pressures. It is well suited for high-volume, high-speed broadcast application with flotation or truck mounted equipment.

* Color-coding of popular sizes in stainless steel and thermoplastic makes it easy to match nozzle flow rates for easy identification.
* Large orifice and passages reduce plugging.
* Quick coupler inlet available for quick connect and disconnect.
* Material: Stainless Steel and Thermoplastic.
* Spray Angles: Varies from 100^o to 145^o depending on pressure and material. For spray angle of specific nozzle, contact factory.

Self-aligning, quick-coupler Flood for automatic nozzle alignment

This nozzle design offers automatic and proper nozzle orifice alignment when using quick couplers. The two slots or grooves on the nozzle line up with the handle levers, and when the handles are pushed down into the lock position, the nozzle is aligned. The handles of the quick coupler cannot be pushed down if the grooves on the nozzle are not lines up. This nozzle makes changing and aligning nozzles quick and easy. Stainless steel.

Recommended Overlap and Nozzle Height
100% overlap of spray pattern is recommended for Flood Tips for uniform coverage. Nozzle height is determined by measuring the width of the spray pattern as it hits the ground. This width should be 100% greater or twice as wide as the nozzle spacing. Adjust nozzle height until this is achieved. If a decision to tilt the nozzle is made, do it before measuring the width of the spray on the ground and adjust nozzle height.

MAXIMUM RECOMMENDED PRESSURE
Brass: 500 psig (34.5 bars)
Thermoplastic: 100 psig (7 bars)
Stainless Steel: 500 psig (34.5 bars)
MAXIMUM RECOMMENDED TEMPERATURE: 120^oF (50^oC)

F FLOODING SPRAY NOZZLES

FOR BROADCAST SPRAYING
This is a wide-angle, broadcast flat spray tip. A 100% overlap of spray pattern is recommended to assure adequate coverage.

NOZZLE TILT
Delavan's extensive research on spray patterns has proven that a tilt of about 45^o for flood nozzles or tips will significantly improve the spray pattern uniformity.

By tilting the nozzle, the effect of boom height variations, which occur while traveling through the field, are dramatically reduced.

Medium size droplet
(Volume Median Diameter: 580 microns at 10 psig and .5 gpm)

* Color coding makes it easy to match nozzle fow rates for easy identification.
* Color coding is available in thermoplatic.
* Improved design produces a more consistent spray angle. The spray angle varies only 100 from 115^o to 125^o at 10 psig (7 bars) throughout all sizes.
* The flange on the new D tip has been thickened to use with DELAFIT/QUICK CHANGE quick attach bodies and caps
* The deflector surface of the new D tip has been moved away from the outlet (orifice) so that the spray will not impinge on the nozzle cap. Can be used with all standard and DELAFIT/QUICK CHANGE caps.
* Large orifice reduces plugging
* Screwdriver slot provides for easy pattern alignment.

The nozzle fit allows the spray nozzle to maintain a more fully developed pattern even when the nozzle outlet is below the recommended height for the best spray pattern uniformity.

	RAINDROP® FLOOD NOZZLE QUICK COUPLER RFLD
	FOR DRIFT-REDUCING FLOODING BROADCAST SPRAYING Combines the flood nozzle's very wide-angle, flat spray pattern with the added advantage of the Raindrop's drift -reduction technology. It is well suited for high-volume, high-speed broadcast application with flotation or truck mounted equipment. Applications: Soil incorporation Pre-emerge applications * Post-emerge/systemic applications MATERIAL: Stainless Steel SPRAY ANGLES: Varies from 100^o to 145^o depending on pressure		* Excellent spray distribution * Large orifice and passages reduce plugging. * Can be used on 60-inch spacing at 60-inch heights * Nozzle design incorporates pre-orifice and impingement surface to reduce drift. * Exclusive Delavan-designed automatic nozzle alignment when used with quick couplers, eliminates need for special couplers accepting pins. * Quick coupler inlet for quick connect and disconnect. * Color-coding of popular sizes in stainless steel and thermoplastic makes it easy to match nozzle flow rates for easy identification. MAX. RECOMMENDED PRESSURE: 125 psig (9 bars) MAX RECOMMENDED TEMPERATURE: 120^oF (50^oC)

	Nozzle Tip Number	PART NUMBERS
		BRASS		STAINLESS STEEL		THERMOPLASTIC
		Bulk	Delapak	Bulk	Delapak	Bulk	Delapak
Raindrop Flood Nozzle Quick Coupler RFLD	QC RFLD 15			50765-1
	QC RFLD 20			50765-2
	QC RFLD 30			50765-3
	QC RFLD 40			50765-4
	QC RFLD 50			50765-5
	QC RFLD 60			50765-6
	QC RFLD 80
	QC RFLD 100			50765-9
	QC RFLD 120			50765-10
D Flooding Spray Nozzles	D .75	29530-1
	D 1	29530-3
	D 1.5	29530-5		29530-6
	D 2	29530-7			00073-689	29530-42N
	D 2.5	29530-9	00076-690				N0073-53
	D 3	29530-12	00073-692			29530-14N	N0073-57
	D 4		00073-710		00073-711	29530-43N
	D 5	29530-15	00073-694			29530-17
	D 6		00073-696			29530-44
	D 7.5			29530-21	00073-699	29530-22
	D 10	29530-23	00073-700			29530-25
	D 15				00073-703	29530-28
	D 20				00073-707	29530-33
F Nozzles Standard Thread	1/8 F.75
	1/8 F1	29300-7
	1/8 F1.5	29300-10		29300-12
	1/8 F2			29300-15
	1/8 F2.5			29300-18
	1/8 F3
	1/8 F4	29300-4
	1/8 F5			29300-24
	1/8 F7.5
	1/8 F10
	1/8 F15
	1/8 F20			29300-39
	1/4 F2
	1/4 F2.5
	1/4 F3
	1/4 F4
	1/4 F5			29300-45
	1/4 F7.5
	1/4 F10
	1/4 F12			29300-144
	1/4 F15
F Nozzles Standard Thread (continued)	1/4 F20
	1/4 F25
	1/4 F30
	3/8 F25
	3/8 F30
	3/8 F35
	3/8 F40			29300-75
	3/8 F45
	1/2 F20			29300-78
	1/2 F30
	1/2 F40			29300-87
	1/2 F45
	1/2 F50			29300-90
	1/2 F60			29300-93
	1/2 F80
	3/4 F100
	3/4 F200			29300-126
	3/4 F210
F Nozzles Quick Coupler	F10 QC
	F15 QC
	F20 QC
	F30 QC					26967-2
	F40 QC					26967-4
	F50 QC					36967-6
	F60 QC					36967-7
	F80 QC					36967-9
	F100 QC
	F120 QC
	F150 QC
	F180 QC
	F210 QC

F & D Nozzles Capacity Chart

	GALLONS PER ACRE (GPA) - BASED ON WATER
Nozzle Tip Number	Press- ure (psig)	Cap- acity (gpim) 1 Nozz.
Nozzle Tip Number			30" Spacing					40" Spacing					60" Spacing
ISO Color			4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	18 MPH
ISO Color			4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	4 MPH	5 MPH	6 MPH	10 MPH	15 MPH	18 MPH
D .75 F .75	10	.075	3.7	3.0	2.5	1.5	.99	2.8	2.2	1.9	1.1	7.4	1.9	1.5	1.2	.74	.50	.41
	20	.11	5.3	4.2	3.5	2.1	1.4	3.9	3.3	2.6	1.6	1.1	2.6	2.2	1.8	1.1	.70	.58
	30	.13	6.4	5.1	4.3	2.6	1.7	4.8	3.9	3.2	1.9	1.3	3.2	2.6	2.1	1.3	.86	.71
	40	.15	7.4	5.9	5.0	3.0	2.0	5.6	4.5	3.7	2.2	1.5	3.8	3.0	2.5	1.5	.99	.82
D 1 F 1	10	.10	4.9	4.0	3.3	2.0	1.3	3.7	3.0	2.5	1.5	.99	2.4	2.0	1.6	1.0	.66	.55
	20	.14	7.0	5.6	4.7	2.8	1.9	5.3	4.2	3.5	2.1	1.4	3.6	2.8	2.3	1.4	.93	.78
	30	.17	8.6	6.9	5.7	3.4	2.3	6.4	5.1	4.3	2.6	1.7	4.2	3.4	2.9	1.7	1.1	.95
	40	.20	9.9	7.9	6.6	4.0	2.6	7.4	5.9	5.0	3.0	2.0	5.0	4.0	3.3	2.0	1.3	1.1
D 1.5 F 1.5	10	.15	7.4	5.9	5.0	3.0	2.0	5.6	4.5	3.7	2.2	1.5	3.8	3.0	2.5	1.5	99	.82
	20	.21	10.5	8.4	7.0	4.2	2.8	7.9	6.3	5.3	3.2	2.1	5.2	4.2	3.5	2.2	1.4	1.2
	30	.26	12.9	10.3	8.6	5.1	3.4	9.6	7.7	6.4	3.9	2.6	6.4	5.2	4.3	2.6	1.7	1.4
	40	.30	14.9	11.9	9.9	5.9	4.0	11.1	8.9	7.4	4.5	3.0	7.4	6.0	5.0	3.0	2.0	1.6
D 2 F 2	10	.20	9.9	7.9	6.6	4.0	2.6	7.4	5.9	5.0	3.0	2.0	5.0	4.0	3.3	2.0	1.3	1.1
	20	.28	14.0	11.2	9.3	5.6	3.7	10.5	8.4	7.0	4.2	2.8	7.0	5.6	4.7	2.8	1.9	1.6
	30	.25	17.1	13.7	11.4	6.9	4.6	12.9	10.3	8.6	5.1	3.4	8.6	6.8	5.7	3.4	2.3	2.4
ISO	40	.40	19.8	15.8	13.2	7.9	5.3	14.8	11.9	9.8	5.9	4.0	9.8	8.0	6.6	4.0	2.6	2.8
D2.5 F2.5	10	.25	12.4	9.9	8.3	5.0	3.3	9.3	7.4	6.2	3.7	2.5	6.2	5.0	4.1	2.4	1.7	1.4
	20	.25	17.3	14.0	11.7	7.0	4.7	13.1	10.5	8.8	5.3	3.5	8.8	7.0	5.8	3.6	2.3	1.6
	30	.43	21	17.1	14.3	8.6	5.7	16.1	12.9	10.8	6.4	4.3	10.8	8.6	7.1	4.2	2.9	2.4
ISO	40	.50	25	19.8	16.5	9.9	6.6	18.6	14.8	12.4	7.4	5.0	12.4	10.0	8.2	5.0	3.3	2.8
D2.5 F2.5	10	.30	14.9	11.9	9.9	5.9	4.0	11.1	8.9	7.4	4.5	3.0	7.4	6.0	5.0	3.0	2.0	1.6
	20	.42	21	16.8	14.0	8.4	5.6	15.5	12.6	10.6	6.3	4.2	10.6	8.4	7.0	4.2	2.8	2.3
	30	.52	26	21	17.1	10.3	6.9	19.3	15.4	12.8	7.7	5.1	12.8	10.2	8.6	5.2	3.4	2.9
ISO	40	.60	30	24	19.8	11.9	7.9	22	17.8	14.8	8.9	5.9	14.8	11.8	9.9	6.0	4.0	3.3
D 2.5 F 2.5	10	.40	19.8	15.8	13.2	7.9	5.3	14.8	11.9	9.8	5.9	4.0	9.8	8.0	6.6	4.0	2.6	2.2
	20	.57	28	22	18.7	11.2	7.5	21	16.8	14.0	8.4	5.6	14.0	11.2	9.3	5.6	3.7	3.1
	30	.69	34	27	23	13.7	9.1	26	20	17.2	10.3	6.9	17.2	13.8	11.4	6.8	4.6	3.8
ISO	40	.80	40	32	26	15.8	10.6	30	24	19.8	11.9	7.9	19.8	15.8	13.2	8.0	5.3	4.4
D 5 F 5	10	.50	25	19.8	16.5	9.9	6.6	18.6	14.9	12.4	7.4	5.0	12.4	10.0	8.2	5.0	3.3	2.8
	20	.71	35	28	23	14.0	9.3	26	21	17.6	10.5	7.0	17.6	14.0	11.7	7.0	4.7	3.9
	30	.87	43	34	29	17.1	11.4	32	26	21	12.9	8.6	21	17.2	14.3	8.6	5.7	4.8
	40	1.0	50	40	33	19.8	13.2	37	30	25	14.9	9.9	25	19.8	16.5	10.0	6.6	5.5
D 6	10	.60	30	24	19.8	11.9	7.9	22	17.8	14.8	8.9	5.9	14.8	11.8	9.9	6.0	4.0	3.3
	20	.85	42	34	28	16.8	11.2	32	25	21	12.6	8.4	21	16.8	14	8.4	5.6	4.7
	30	1.0	51	41	34	21	13.7	39	31	26	15.4	10.3	26	21	17.1	10.2	6.9	5.7
	40	1.2	59	48	40	24	15.8	45	36	30	17.8	11.9	30	24	19.8	11.8	7.9	6.6
D 7.5 F 7.5	10	.75	37	30	25	14.9	9.9	28	22	18.6	11.1	7.4	18.6	14.8	12.4	7.4	5.0	4.1
	20	1.1	53	42	35	21	14.0	39	32	26	15.8	10.5	26	21	17.5	10.6	7.0	5.8
	30	1.3	64	51	43	26	17.1	48	39	32	19.3	12.9	32	26	21	12.8	8.6	7.4
	40	1.5	74	59	50	30	19.8	56	45	37	23	14.8	37	30	25	14.8	9.9	8.2
D 15 F 15 QC RFLD 15	10	1.0	50	40	33	19.8	13.2	37	30	25	14.9	9.9	24.8	19.8	16.5	10.0	6.6	5.5
	20	1.4	70	56	47	28	18.7	53	42	35	21	14.0	35	28	23	14.0	9.3	7.8
	30	1.7	86	69	57	34	23	64	51	43	26	17.1	42	34	29	17.2	11.4	9.5
	40	2.0	99	79	66	40	26	74	59	50	30	19.8	50	40	33	19.8	13.2	11.0
D15 F 15 QC RFLD 15	10	1.5	74	59	50	30	19.8	56	45	37	23	14.8	37	30	25	14.8	9.9	8.2
	20	2.1	105	84	70	42	28	79	63	53	32	21	52	42	35	21	14.0	11.7
	30	2.6	129	103	86	51	34	96	77	64	39	26	64	52	43	26	17.1	14.3
	40	3.0	149	119	99	59	40	111	89	74	45	30	74	60	50	30	19.8	16.5
D20	10	2.0	99	79	66	40	26	74	59	50	30	19.8	50	40	33	19.8	13.2	11.0
	20	2.8	140	112	93	56	37	105	84	70	42	28	70	56	47	28	18.7	15.6
	30	3.5	171	137	114	69	46	128	103	86	51	34	86	68	57	34	23	19.1
	40	4.0	198	158	132	79	53	148	119	99	59	40	98	80	66	40	26	22
F 20 QC RFLD 20	10	2.0	74	59	50	30	19.8	50	40	33	19.8	13.2	25	19.8	16.5	9.9	6.6	5.5
	20	2.8	105	84	70	42	28	70	56	47	28	18.7	35	28	23	14.0	9.3	7.8
	30	3.5	128	103	86	51	34	86	68	57	34	23	43	34	29	17.1	11.4	9.5
	40	4.0	148	119	99	59	40	98	80	66	40	26	49	40	33	19.8	13.2	11.0
F25	10	2.5	93	74	62	37	25	62	50	41	25	16.5	31	25	21	12.4	8.2	6.9
	20	3.5	131	105	88	53	35	88	70	58	35	23	44	35	29	17.5	11.7	9.7
	30	4.3	161	129	107	64	43	108	86	71	42	29	54	43	36	21	14.3	11.9
	40	5.0	186	149	124	74	50	124	100	82	50	33	62	50	41	25	16.5	13.8
F 30 QC RFLD 30	10	3.0	11	89	74	45	30	74	60	50	30	19.8	37	30	25	14.9	9.9	8.2
	20	4.2	158	126	105	63	42	106	84	70	42	28	53	42	35	21	14.0	11.7
	30	5.2	193	154	129	77	51	128	102	86	52	34	64	51	43	26	17.1	14.3
	40	6.0	223	178	148	89	59	148	118	99	60	40	74	49	50	30	19.8	16.5
F 40 QC RFLD 40	10	4.0	149	119	99	59	40	100	80	66	40	26	50	40	33	19.8	13.2	11.0
	20	5.7	210	168	140	84	56	140	112	93	56	37	70	56	47	28	18.7	15.6
	30	6.9	257	206	171	102	69	172	138	114	68	46	86	69	57	34	23	19.1
	40	8.0	297	238	198	119	79	198	158	132	80	53	99	79	66	40	26	22
F45	10	4.5	167	134	111	67	45	112	90	74	44	30	56	45	37	22	14.8	2.4
	20	6.4	236	189	158	95	63	158	126	105	64	42	79	63	53	32	21	17.5
	30	7.8	289	231	193	116	77	192	154	129	78	51	96	77	64	39	26	21.4
	40	9.0	334	267	223	134	89	222	178	148	90	59	111	89	74	45	30	25
F50 QC RFLD 50	10	5.0	186	149	124	74	50	124	100	82	50	33	62	50	41	25	16.5	13.8
	20	7.1	163	210	175	105	70	176	140	117	70	47	88	70	58	35	23	19.4
	30	8.7	322	257	214	129	86	214	172	143	86	57	107	86	711	43	29	24
	40	10	371	297	248	149	99	248	198	165	100	66	124	99	82	50	33	28
F 60 QC RFLD 60	10	6.0	223	178	148	89	59	148	118	99	60	40	74	59	50	30	19.8	16.5
	20	8.5	315	252	210	126	84	210	168	140	84	56	105	84	70	42	28	23
	30	10.4	386	309	257	154	103	258	206	171	102	69	129	103	86	51	34	29
	40	12.0	445	356	297	178	1119	298	238	198	118	79	149	119	99	59	40	33
F 80 QC RFLD 80	10	8.0	297	238	198	119	79	198	158	132	80	53	99	79	66	40	26	22
	20	11.3	420	336	280	168	112	280	224	187	112	75	140	112	93	56	37	31
	30	13.9	514	412	343	206	137	342	274	229	138	91	171	137	114	69	46	38
	40	16.0	594	475	396	238	158	396	316	264	158	106	198	158	132	79	53	44
F 100	10	10	371	297	248	149	99	248	198	165	100	66	124	99	82	50	33	28
	20	14.1	525	420	350	210	140	350	280	233	140	3	175	140	117	70	47	39
	30	17.3	643	514	429	257	171	428	342	286	172	114	214	171	143	86	57	48
	40	20	743	594	495	297	198	496	396	330	198	132	248	198	165	99	66	55
F 120	10	20	743	594	495	297	198	496	396	330	198	132	248	198	165	99	66	55
	20	28.3	1050	84	700	420	280	700	560	467	280	187	350	280	233	140	93	78
	30	34.6	1286	1029	857	514	343	858	686	572	342	229	429	343	286	171	114	95
	40	40	1485	1188	990	594	396	998	792	660	396	264	499	396	330	198	132	110
F 150	10	21	780	624	520	312	208	520	416	346	208	139	260	208	173	104	69	58
	20	29.7	1103	882	735	441	294	736	588	492	294	196	368	294	245	147	98	82
	30	36.4	1350	1080	900	540	360	900	720	600	360	240	450	360	300	180	120	100
	40	42	1599	1247	1039	624	416	1040	832	693	416	277	520	416	346	208	139	116
F 180	10	12	446	356	297	178	119	298	238	198	118	79	149	119	99	59	40	33
	20	17	630	504	420	252	168	420	336	280	168	112	210	168	140	84	56	47
	30	20.8	772	617	514	309	206	514	412	343	206	137	257	206	171	103	69	57
	40	24	891	713	594	356	238	594	476	396	238	158	297	238	198	119	79	66
F 200	10	15	557	446	371	223	148	372	298	248	148	99	186	149	124	74	50	41
	20	21.2	786	630	525	315	210	526	420	350	210	140	263	210	175	105	70	58
	30	26	965	772	643	386	257	642	514	429	258	171	321	257	214	129	86	71
	40	30	1114	891	742	446	297	742	594	495	296	198	371	297	248	149	99	82
F 210	10	18	668	535	446	267	178	446	356	297	178	119	223	178	148	89	59	50
	20	25.5	945	756	630	378	252	630	504	420	252	168	315	252	210	126	84	70
	30	31.2	1157	926	772	463	309	772	618	514	308	206	386	309	257	154	103	86
	40	36	1337	1069	891	535	356	892	712	594	356	238	446	356	297	178	119	99